|
| Name
| Type
| Values
| ACC
| CLI Parameter
|
SNMP
| Group
| N/A
| R
| snmpstatus
|
Read Password
| DisplayString
| User Defined
public (default)
| W
| snmprpasswd
|
Read/Write Password
| DisplayString
| User Defined
public (default)
| W
| snmprwpasswd
|
SNMP Trap Host Table
| N/A
| N/A
| RW
| snmptraphosttbl
|
SNMP IP Access Table
| N/A
| N/A
| RW
| snmpipaccesstbl
|
SNMP IP Access Table Arguments
When creating table entries, you may either specifying the argument name followed by argument value or simply entering the argument value. When only the argument value is specified, then enter the values in the order depicted by the following table. CLI applies default values to the omitted arguments. Due to the nature of the information, the only argument that can be omitted comment argument.
| Name
| Type
| Values
| ACC
| CLI Parameter
|
SNMP IP Access Table
| N/A
| N/A
| R
| snmpipaccesstbl
|
Table Index
| Integer
| User Defined
| N/A
| index
|
IP Address
| IpAddress
| User Defined
| RW
| ipaddr
|
Subnet Mask
| IpAddress
| User Defined
| RW
| submask
|
Interface
| Integer
| Ethernet
PC Card A
PC Card B
| RW
| if
|
Comment
| DisplayString
| User Defined
| RW
| cmt
|
Status
| Integer
| enable
disable
delete
| RW
| status
|
SNMP Table Host Table Arguments
When creating table entries, you may either specifying the argument name followed by argument value. CLI applies default values to the omitted arguments. Due to the nature of the information, the only argument that can be omitted is the comment argument.
| Name
| Type
| Values
| ACC.
| CLI Parameter
|
SNMP Trap Host Table
| N/A
| N/A
| R
| snmptraphosttbl
|
Table Index
| Integer
| User Defined
| N/A
| index
|
IP Address
| IpAddress
| User Defined
| RW
| ipaddr
|
Password
| DisplayString
| User Defined
| W
| passwd
|
Comment
| DisplayString
| User Defined
| RW
| cmt
|
Status
| Integer
| enable
disable
delete
| RW
| status
|
|
