"set" CLI Command

Sets (modifies) the value of given parameter. To see a definition and syntax example, type only set and then press the Enter key. To see a list of available parameters, enter a space, then a question mark (?) after set (example: set ?).

Syntax:

[Device Name]>set <Parameter> <Val>

[Device Name]>set <Table> <Index> <Arg1> <Val1> ... <ArgN> <ValN>

Example:

[Device Name]>set sysloc "Main Lobby"

[Device Name]>set snmpipacctbl 0 ipaddr 10.0.0.10 submask 255.255.0.0